Introducing TAP Micro – our most cost-accessible TAP Controller yet! By ditching the touchscreen and transferring complete control of the TAP Micro to the TAP Kiln Control Mobile App, we’re able to offer TAP Micro at a fraction of the cost of our mainline TAP Controllers.
TAP Micro is optionally available with a 2.4” capacitive touchscreen which provides the option to monitor the kiln directly and to abort firings.
Note: The TAP Micro is intended for new kiln and oven builds. Due to its dimensions and wiring, it is not intended as a drop-in replacement for existing automatic controllers.
The TAP Micro is a minimalist controller that provides you the ability to:
The TAP Kiln Control Mobile App (available on iOS and Android) allows you to:
A Premium Subscription unlocks Remote Start – one of our most requested features!
Power: 5VDC or 24VAC (w/ Adapter)
Input: Type K Thermocouple
Outputs: 5VDC or 12VDC (w/ Adapter)
Output Channels: 1 Element, 1 Safety
The TAP Micro Controller can be used to support any new kiln, oven, or furnace build that requires only a single temperature sensor and control of a single heating element. This product will work on most single-zone relay-controlled kilns and ovens.
Power Input
» Operating Voltage: 5VDC +- 10%
» Operating Current: 500mA
» Power: 2.5W
Sensor Inputs and Operating Range
» Type K: -454 to 2500F
Process Control Outputs
» Number of Element Control Outputs: 1
» Number of Safety Outputs: 1
» Output Voltage: 5VDC
» Max Simultaneous Output Current: 0.5A
Environmental Operating Conditions
» Operating Temperature: 0 to 170F
» Non-Operating Temperature: -30 to 205F
» Relative Humidity: 0 to 90%, non-condensing
Accuracy
» Calibration Ambient Temperature: 77F +- 5 (25C +- 3)
» Calibration Accuracy: +- 0.1% of span, +- 1C at calibrated ambient temperature
Real-Time Clock with Battery Backup
» Field replaceable lithium battery – CR1220
Data Logging, Retention, and Access
» Local data logging – Customizable intervals
» File Types: CSV
» Transfer: Email, On-Demand
» Storage: SD Card Micro – Expandable
$199.00
TAP II can be used for any single-zone kiln/oven build, or as a replacement for existing digital controllers....
The TAP Controller can be used for any multi-zone kiln/oven build, or as a replacement for existing digital controllers....
Coming soon! TAP & Go is a simplified single setpoint controller – ideal for heat treat, knifemaking, and other kiln firing processes that...
This is a sample of TAP Micro....
© 2023 SDS Industries, All Rights Reserved
© 2022 SDS Industries, All Rights Reserved