WiFi & Connectivity FAQ

TAP Controllers are only able to connect to wireless networks that meet the following requirements: 

• 2.4 GHz wireless network with WEP, WPA, or WPA2 security. 
• Unsecured networks are also supported – but networks that use a captive portal (like many cafes and airports) are not. 
• WPA3 and EAP networks are not supported.
• Signal strength of at least two bars is recommended.  

Do you need help setting up TAP Kiln Control Mobile? Check out this how-to article!

A TP-Link TL-WN823n WiFi Dongle is only needed to connect the original TAP Controller to local WiFi networks and can be purchased here. 

TAP II and TAP II Pro, as well as all of our other controllers, have integrated WiFi and do not require a WiFi Dongle

If you’re unsure what type of controller you’re using, you can easily tell the difference between an original TAP and a TAP II or TAP II Pro Controller by looking at the user interface: 

First, make sure you’re attempting to connect to a wireless network that meets TAP’s network requirements and that you’ve entered your login details correctly.

After confirming you’ve entered the correct wireless network credentials, reboot the controller by turning it off and back on. Doing this will reinitiate a network connection and force a data synchronization. 

Please note: TAP Controllers will not be able to connect to any network that requires a specific login or acknowledgment after connecting (typical of hotels, coffee shops, airports, etc.). 

Please note: Other than the original TAP Kiln Controller, all of our other controllers have integrated WiFi and do not require a WiFi dongle.

The WiFi dongle allows the discontinued original TAP Controller to connect to the internet, allowing you to connect your controller to the TAP Kiln Control Mobile app. Available on iOS or Android, the TAP Kiln Control Mobile app unlocks a new level of ease-of-use with the following benefits: 

• Maintain complete control of your projects at all times – even if you have to step away from your kiln. 
• Enjoy peace of mind by knowing the exact status of your kiln through every stage of the firing process.  
• Easily stay informed about your firing process with real-time push notification alerts and alarms. 
• Automatically track electric kiln firing costs as well as component usage for preventative maintenance.
• Save time and effort by being able to edit and create schedules, edit settings, make firing adjustments, skip steps, and abort firings – all from your phone or tablet! 

Need help connecting to the app? Check out this article for a step-by-step guide connecting your controller to TAP Kiln Control Mobile.

The original TAP Controller supports wireless and wired network connections (on pre-2021 units). Connecting the original TAP Controller to WiFi requires the use of a TP-Link TL-WN823n WiFi Dongle, which is available for purchase from our website. 

TAP II, TAP II Pro, as well as all of our other current controller models, have integrated WiFi and don’t require any adapter.  

First, make sure you’re attempting to connect to a network that meets TAP’s network requirements.

Then, follow these steps to connect your TAP II or TAP II Pro Controller to WiFi:

1. Press Menu>Settings>Network. 
2. Click the Wireless tab to connect to a new network. 
3. Select your preferred wireless network from the Available Networks list, then press “Connect to Network” and follow the on-screen prompts.

For additional help, check out the Network Settings Video from our How-To TAP Series: